Home.Suppliers.Application.Articles.Products.Rentals.Contact Us.

Article 1

Oil Cleanliness

 

At Particle Test we often get asked,  what is oil cleanliness and how should I measure oil cleanliness? Oil cleanliness as the name suggests is how clean your oil is, but more to the point oil cleanliness is telling you how effectively your lubricant is working. Oil cleanliness is normal measured through the use of the ISO4406 or ISO code, NAS or the SAE 749D.

 

Article 2

Portable Oil Contamination Monitoring

 

Affordable and portable oil contamination monitors are now available now at Particle Test. The PAMAS S50 is a small, portable workshop or field tool that can be used to measure the oil cleanliness or oil contamination and report the ISO code of the oil in your compartment

 

Article 3

Wear Metal Analysis in Used Oil

 

The Spectroil M/C-W is a compact, rugged, transportable and easy to use spectrometer designed specifically for the wear metal analysis of used oil samples. It measures trace quantities of elements dissolved or suspended as fine particles in natural or synthetic petroleum based products using the time-tested and reliable rotating disc electrode (RDE) technique

 

Article 4

Surface Area and Porosity Analysis

 

The BELSORP-max is a high-end volumetric gas adsorption instrument. The BELSORP-max can measure up to 3 samples simultaneously offer high throughput at the same time as high-resolution analysis.

 

Article 5

Gas Adsorption Analyser

 

BEL offers a range of instruments to measure surface and pore size distribution by gas adsorption.The BEL range of instruments offer the flexibility of a high-resolution research tool at the same time a system capable of high throughput.

 

Article 6

Viscosity of Lubricants

The Spectro-Visc is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the viscosity analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test the viscosity of a wide range of lubricants.

 

Article 7

Solution to Clean Injectables

An important factor in intravenous solutions is the correct dose, equally important is ensuring that the inject able solution contain no particles of a harmful size. Intravenous solutions with large particle contamination may result in problems as serious as a heart failure.

 

Article 8

Surface Area of Dry Ingredients

This laboratory unit can measure 3 sample simultaneously and is capable of measuring sample with surface areas as low as 0.01m2/g. Equipped with the powerful and easy to use BEL master software makes the BELSORP mini II ideal for both research and QC applications.

 

Article 9

Proactive Maintenance

The Spectroil M/C-W Oil Analysis Spectrometer is a easy and fast way to perform analysis of wear metals, contaminants and additives in lubricants, hydraulic fluids and cololants.

 

Article 10

Water Quality with PAMAS

The PAMAS Waterviewer is an online particle counter for water quality control measurements. This online unit will measure particle sizes from 1µm up to 200µm, in particle concentrations from 0 up to 200,000 p/mL on up to 32 different waterlines.

 

Article 11

PAMAS S40 Particle Counter

 

The PAMAS S40 is a portable particle counting system that has been design for use as a contamination control tool. The PAMAS S40 particle counter uses a volumetric cell design which guarantees the highest accuracy, resolution and the best statistical information.           

 

Article 12

Cleanliness in Subsea Systems in Oil & Gas

 

The importance of the cleanliness in subsea systems is very critical. Not only do the glycol or hydraulic fluids need to meet the required NAS cleanliness, but so do the subsea components including christmas trees, pipeline, umbilicals, accumulators, HPU s, actuators, control units and values.

Article 13

Fuel Dilution in Engine Oil

 

The Fuel sniffer offered by Particle Test is ideal for field or laboratory use for measurement of fuel in engine oil. The fuel sniffer is easy to operate, requires low maintenance and does require consumables. 

Article 14

PAMAS S40 Water Glycol for Oil & Gas

 

Tried and trusted for flushing and qualification of Christmas trees, HPU s, subsea umbilical s, hydraulic accumulators, valves and control systems. With the online capability the PAMAS S40 WG is ideal for integration in to flushing rigs, offering real time results in NAS1638 and AS 4059.

Article 15

FluidScan for On-Site Oil Condition Monitoring

 

The FluidScan analyzes lubricants and fluids using infrared spectroscopy, a technique that has found wide acceptance as a primary test for contamination and degradation. It performs the analyses with the same accuracy as laboratory instruments, but does so on-site in a handheld version. The FluidScan thus reports and stores information on lubricant condition at the point of use.

Article 16

Spectro Industrial Tribology Laboratory for Onsite Condition Monitoring

 

The Spectro Industrial Tribology Laboratory (ITL) is a turnkey system providing condition monitoring for machines and engines by oil analysis. The measurements made using the Industrial Tribology Laboratory determine both lubricant and machine condition, the cornerstones of any effective predictive maintenance system.

Article 17

Wear Metal Analyser

 

The MIDAS ferrous debris analyzer is rapid and simple to operator accompanied by supreme sensitivity. Cost effective operation enables routine on-site ferrous debris monitoring, and is also a valuable instrument for precision specialist condition monitoring laboratory work.

Article 18

The MIDAS Ferrous Metal Debris Monitor

 

Manor Technology has introduced The MIDAS free standing oil sample based ferromagnetic metal debris analyser, to facilitate ferrous debris analysis. The rapid and simple operation of MIDAS is accompanied by supreme sensitivity. MIDAS cost effective operation enables routine on-site ferrous debris monitoring, and is also a valuable instrument for precision specialist CM laboratory work.

Article 19

Patch Test Kit

 

The Particle Test patch test kit is a must for identifying and monitoring the types and levels of contamination in fluid power systems. The patch test kit enables instant visual analysis through an optical microscope of the major types of system wear including bright and black metals, silica, fibres, elastomers, plastics and others.

Article 20

Beyond Particle Counting - Automatic Wear Classififcation

 

The LaserNet Fines is a bench-top analytical instrument that combines the oil analysis techniques of particle shape classification (basic ferrography) and particle counting in one instrument. It analyzes hydraulic and lubricating oil samples from various types of equipment and machinery that are part of a machine condition monitoring program. The monitoring is based primarily on the morphological (ferrography) analysis and the particle size distribution of the abnormal wear particles that are created from the internal components of the machine

Article 21

Spectroil Q100: The Next Generation of Oil Analysis Spectrometers

The Spectroil Q100 is the ideal spectrometer for the in-service oil analysis laboratory because innovative technology has helped to make it more capable and smaller in size. The addition of a CCD optical system has also made it more flexible for even the most unique in-service oil analysis applications. The standard configuration of the Spectroil Q100 comes with 22 elements for the analysis of wear metals, contaminants, and additives.  Additional elements and the capability to analyze coolants can be added at any time.

Article 22

Onsite and In-Field Used Oil Analysis Equipment

Particle Test offers a complete range of Spectro Inc instrumentation for machine condition monitoring based on oil and fuel analysis. Spectro condition monitoring products are unique in that they have been designed to work equally well in the field or in the laboratory. Our customers benefit from our condition monitoring products by:

Article 23

Particle Test introduce their range of Manual and Automated Petroleum ASTM Testing Equipment

Particle Test offers a complete range of Koehler Petroleum Testing products that cover most ASTM, ISO, IP and other test methods related to Petroleum and Petrochemical testing. Koehler have over 50 years experience in manufacturing instrumentation for the Petroleum and Petrochemical.

Article 24

PAMAS S40 Particle Counter

Particle Test offers a complete range of PAMAS particle counters that cover the ISO4406, NAS1638 and SAE AS4059. PAMAS have almost 20 years experience in design and manufacture of PAMAS counters for a variety of different instruments.

Articles

Copyright ® 2007 Particle Test Pty Ltd